The roof leads, not the sales graphic.
Mounting, waterproofing, shading and electrical work are clarified on the actual building — not on a model.

COMPLETE PV SYSTEMS · OPTIONAL STORAGE
The Canton of St. Gallen is a center for energy research and innovation – with HSR (now OST) as a driver. The ambitious St. Gallen Energy Concept 2050 massively promotes PV expansion, and the St. Gallen Energy Agency advises builders on the diverse subsidy options.
St. Gallen is a center for energy research – OST (Eastern Switzerland University of Applied Sciences) and the SPF Institute for Solar Technology in Rapperswil are among the leading solar research institutions in Switzerland.
Figures with sources
Three questions decide almost every project before a roof is ever measured. Here they are with source and date, so it stays clear what each figure rests on.
Costs
Example: 5–10 kWp rooftop PV: CHF 13,500–27,000. Incl. 8.1% VAT, before incentives and tax deductions, without a battery. Calculated from the SFOE median of CHF 2,497/kWp: the range reflects different system sizes. A market comparison, not a quote.
Roof renovation, structural reinforcement and replacement of the meter cabinet are not included. Roof access, electrical work and planning can change the price. Your specific quote follows the property assessment.
Costs with calculation and sourcesSizing
A typical household using around 4,000 kWh per year needs roughly 25 m² of module area (Swissolar, February 2024). As a starting figure, global irradiation in Canton St. Gallen is around 1100 kWh/m² per year. Whether that works on your roof in St. Gallen depends on orientation, pitch and shading — not on the floor plan.
Two federal bonuses explicitly do not apply to a single-family home: the winter electricity bonus requires at least 100 kW, and the tilt bonus at least 75 degrees of pitch. Neither applies to an ordinary pitched roof. Counting on them makes the business case look better than it is.
Clarify notification and permission before installationStorage
Battery storage earns its money through self-consumption. Electricity you use yourself saves not only the energy price but also grid fees and levies — which is why it is worth more than exported electricity. That is what decides whether a battery pays off.
Since 1 January 2025, an association for self-consumption (ZEV) may also use the existing connection lines. This makes apartment buildings and neighbourhood setups considerably cheaper, as no dedicated line is required. Relevant grid operators in Canton St. Gallen: SAK, sgsw.
When battery storage makes senseServices
PV system, heat pump, storage, wallbox and monitoring from one team. Every service is planned as part of a working energy system.

01 · Roof & facade
We review roof, structure, shading, cable routing, inverter and grid connection. Then we create a technically reliable quote.
Roof review · Electrical coordination · Commissioning
01 / 05
Process
From first contact to commissioning, every system follows a clear process. We clarify roof, electrical work, incentives and expansion path completely. Only then do you receive a reliable quote. No site chaos, no wishful math.
Your key details are enough for a first, honest orientation — no appointment, no obligation.
We measure the roof by drone and clarify electrical work, regulations and the grid operator.
You see every line item individually, realistic ranges and sensible options such as storage or a wallbox.
We coordinate execution, registration, acceptance and documentation until your system is reliably connected to the grid.
Swiss facts
Applies to residential and commercial properties.
Economics
We map self-consumption, feed-in tariff and payback for your property — so you see early what the system realistically returns.
Proof
Our quotes are not built from flat packages, but from checked data, technical pre-assessment and clearly itemized positions.
Planning basis
Roof potential, irradiation and addresses are checked against GeoAdmin and BFE Sonnendach: the same datasets used by federal and cantonal bodies.

Property review
The initial estimate gives realistic orientation. For the final quote, we capture roof areas, access and technical conditions through a 3D survey (drone) and on-site review — precise, not based on satellite assumptions.

Electrical
From electrical planning through protection equipment to grid registration: all safety-critical steps are carried out by licensed electrical professionals, in-house or through vetted partners.

Quote
Every line item is shown individually instead of hidden in a flat package — so variants and ranges stay traceable from the start.

Execution standard
Regional clarification
In Switzerland, permits, grid operator, metering concept and incentive path always depend on the property, municipality and canton. These are exactly the points clarified early before a quote becomes binding.
That avoids a generic promise and creates a well-founded assessment that fits the region and the building.
Components by
The Founders
You know before signing who calculates your project and who builds it. Behind that are two founders with two areas of expertise — engineering and finance — and the conviction that a solar system only works long-term when both fit together from the start.
Christian Freiberger
CFA · former KPMG Senior Manager
Co-Founder · Strategy & Finance
Independent management consultant since 2015, previously Senior Manager at KPMG. Most recently Interim Treasury Manager at an energy storage manufacturer. Christian brings the financial structure: liquidity planning, transparent calculations and no project whose numbers don’t add up.
Marc Hammerschmidt
B.Eng. Mechanical Engineering
Co-Founder · Engineering & Planning
Marc handles the technical side: planning, structural analysis, system integration and execution that remains traceable a decade later. An engineering mindset means no improvisation, only well-reasoned solutions for every roof.
Next step
Questions about your roof? We’ll go through them with you personally — the initial estimate is the easiest way in.
Building in focus
Full-black, in-roof or flat-roof: in St. Gallen we plan not for a datasheet, but for a building that has to stand up architecturally and within its local context.

Architecture first
In St. Gallen, materiality, visual lines and technical details are aligned so the system fits the design language and performs cleanly over time.
Mounting, waterproofing, shading and electrical work are clarified on the actual building — not on a model.
The system grows precisely into the building: tight penetrations, protected facade, modules sliding into the rails, and an aesthetic that fits the architecture instead of disturbing it.
The inverter, registration and documentation are done, cable routes and labels stay traceable, and the roof becomes a calm, reliable energy source for everyday use.
Mounting, waterproofing, shading and electrical work are clarified on the actual building — not on a model.
The system grows precisely into the building: tight penetrations, protected facade, modules sliding into the rails, and an aesthetic that fits the architecture instead of disturbing it.
The inverter, registration and documentation are done, cable routes and labels stay traceable, and the roof becomes a calm, reliable energy source for everyday use.
Clarity before commitment
The key points are explained clearly, factually and without artificial urgency. For details, we assess your property in its project context.
Canton check
For local PV projects, the municipal boundary is not the only factor: roof access, snow load, shading, meter cabinet and grid connection determine the project flow.
Canton St. Gallen has its own rules for subsidies, permits and grid connection. We check them before quoting and record them in the project documentation.
Canton St. Gallen guideline: approx. 1100 kWh/m² global irradiation per year.
Relevant grid operators in the canton: SAK, sgsw. Metering concept and registration are clarified before execution.
Heritage guidelines revised 2024: easier solar access also in historic districts. Old town St. Gallen, Rapperswil-Jona, Lake Constance region: achievable with right approach. Normal notification procedure for standard systems.
No general cantonal subsidy — subsidies via Pronovo (federal) and municipal programs. Tax deductibility distributable over 3 years. SAK: min. 6 Rp./kWh guaranteed.
In the region
Your key details produce a first orientation on price range, incentives and payback — a solid basis to talk through your project.
A realistic span for your roof — not a rounded sales promise.
Electrical scope, metering and grid connection belong to the calculation from the start, not to a surprise afterwards.
If it fits, a traceable quote follows. If it doesn’t, we’ll tell you that openly.
Start here
Quick to complete, concrete as a starting point for your building — and no obligation.
Direct contact
If you prefer to speak directly or already have documents and project context at hand, you can reach us through the usual channels.
Works well for
Roof plans, photos, existing quotes, questions around electrical coordination or already defined project timelines.
Phone
Location
Kirchweg 32, 8102 Oberengstringen, Zürich, CH
Coverage
Complete PV systems with planning, installation, electrical coordination and commissioning across all German-speaking cantons.
Core services
The key services, tailored directly to St. Gallen and the local requirements in your region.
Regional service
St. Gallen is an energy research centre: the SPF Institute for Solar Technology at OST in Rapperswil is among Switzerland's leading solar research institutions. SAK compensates from 6 Rp./kWh + HKN. The City of St. Gallen provided municipal supplementary subsidies until 2024; since 2025 the focus is on economic amortisation within 10–15 years. The canton fully implemented MuKEn 2014 since 2021.
Regional service
In Canton St. Gallen, installers benefit from knowledge transfer from the SPF Institute for Solar Technology in Rapperswil – one of Europe's oldest and most renowned solar research institutions (founded 1981, 40 employees). SAK provides efficient grid connection across Eastern Switzerland. Full MuKEn implementation since 2021 ensures predictable conditions from permitting to commissioning.
Regional service
Eastern Switzerland offers a high density of industrial and commercial buildings with unused flat roofs. SAK compensates from 6 Rp./kWh and supports ZEV models for commercial self-consumption associations. The SPF Institute in Rapperswil delivers practical research on mounting systems and flat-roof optimisation – a knowledge advantage that feeds directly into project planning.
Further reading
These guides answer the questions that come up most often before deciding on a solar installation.
Classifies Pronovo programmes, the right timing for the EIV application, required documents and additional city or municipal support for PV projects in St. Gallen.
Clarify when a notification is sufficient for rooftop or facade PV in Canton St. Gallen, when cultural monuments, townscape protection or natural monuments trigger a building permit, and which documents the municipality needs.
What owners in St. Gallen should clarify before installation and commissioning: grid connection, metering concept, safety verification, meter, Pronovo and handover.
What St. Gallen’s self-generation obligation for new buildings means in practice: 10 W per m² energy reference area, 30 kW cap, exemptions, substitute levy and project workflow.
The locations directory gives you an overview of all cantons and municipalities and takes you straight to the information for your region.